YILIANWANG|ELINKWOON|Ethernet Switch|PoE Switch|Optical|industrial Switch|WLAN|AP

ShenZhen YiLianWang Technology Co., Ltd.

Home > Product > PoE Switch
  1. ECOM P2610F 8 Ports 100M+2 PoE Optical Switch
  2. ECOM P2610F 8 Ports 100M+2 PoE Optical Switch
  3. ECOM P2610F 8 Ports 100M+2 PoE Optical Switch
  4. ECOM P2610F 8 Ports 100M+2 PoE Optical Switch

ECOM P2610F 8 Ports 100M+2 PoE Optical Switch

  • No.:P2610F
  • Brand :ECOM
  • Weight:3kg

ECOM P2610F 8 Ports 100M+2 PoE Optical Switch

  1. Detailed information

Product Description:

P2610F is PoE gigabit Ethernet switch, designed especially for work groups, internet bars, schools, small and medium enterprises, upgrade the local area network to gigabit, and meet their demand of high bandwidth.P2610F provides 8 port 10/100M POE port, 2 gigabit RJ45port and 2 (mini )sfp port , all ports support non-blocking full wire speed switching and, 11-inch appearance design

 

Good compatibility: 

8 10/100M port, can seamless integrated the 10Mbps, 100Mbps with 2 port 10/100/1000Mbps network equipment that in the same network

 

Port function:

Network port 1-8: standard 100Mbps adaptive Ethernet port. Supports 10/100Mbps Ethernet, and can work in full-duplex or half-duplex mode, must be with 8 pairs of Cat5e/Category 6 and above. Each of the eight ports supports both polarity inversion and auto-rollover (auto MDI/MDIX). Each port can function as both an ordinary port and an uplink port.

PoE port 1-8: the standard 10/100 Mbps Ethernet port supports IEEE 802.3af/at-compliant Ethernet power supply network. As long as the standard 802.3af/at terminal devices are connected to ports 1 to 8, the system automatically test and determine, in accordance with 802.3af/at the specification, PoE function will be automatically activated, the machine will provide the appropriate voltage and current through the connected network wiring to the terminal device. If the judge of the terminal device is not According to the 802.3af/at specification, the PoE function is not activated and can only be used as a normal interface to transmit signals, and does not transmit power to protect the switch.

The uplink port: 2 1000Mbps full-duplex uplink SFP optical port, 2 multiplexed 10/100/1000Mbps electrical port


Product feature:

1.Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q,IEEE 802.1p, 802.3af/at standard

2. Flow control mode: full duplex adopts IEEE 802.3x standard, half duplex adopts backpressure standard

3.8/10/100M adaptive RJ45 ports, 2 Gigabit optical multiplexing uplink port, supports jumbo frame function, maximum support 9k bytes

4. Supports port-based and 802.1Q-based VLANs.

5. Supports the trunk function.

6. Supports port bandwidth setting function

7. Provide line detection function to facilitate line troubleshooting;

8. Support IEEE 802.1p priority protocol mode;

9. Provides 802.1x-based port security control;

9.Support broadcast storm control function;

10 Support port mirroring function to facilitate network monitoring;

11 Supports port traffic statistics function.



TAG:   ECOM P2610F 8 Ports 100M+2 PoE Optical Switch
Powered by MetInfo 5.3.18 ©2008-2018 www.metinfo.cn